Installation on gypsum plaster (mortar group PIV to DIN 18550)
All plasters beneath ceramic tiles or natural stone must be struck off tightly with a straight edge. The surface must remain rough and may not be smoothened or felt boarded. Gypsum plaster is only suitable as a substrate for domestic bathrooms.
|
PRIMING
|
|
|
Rapid drying, quartz filled dispersion primer for absorbent and non-absorbent substrates
|
|
|
|
WATERPROOFING
|
|
|
Flexible, mineral-based, vapour permeable waterproof slurry for areas with increased demands in interior and exterior areas
|
|
|
|
One component flexible waterproof slurry, wall/floor
|
|
|
|
Fabric reinforced sheet style bonded waterproof membrane
|
|
|
|
TILE INSTALLATION
|
|
|
Grey, highly flexible adhesive for interior and exterior use
|
|
|
|
Creamy consistency flexible adhesive
|
|
|
|
Lightweight, low dust flexible adhesive for thin, medium and thick bed installation techniques
|
|
|
|
Flexible natural stone adhesive
|
|
|
|
GROUTING
|
|
|
Simple to use grout, up to 6 mm joint widths
|
|
|
|
Mineral-based multi-function flexible grout for tiles, natural stone and other finishes from 1 to 10 mm joint widths, with FAST TECHNOLOGY
|
|
|
|
Silicone sealant for movement joints
|
|
|
|
Silicone sealant for discolouration-free elastic jointing
|
|
|
