AG70 Technical Data Sheet EN 2918.pdf
1 ページ
67.6キロバイト
Download
<h1>AG70 Technical Data Sheet EN 2918.pdf</h1> <p>SCHOMBURG GmbH & Co. KG <br />Aquafinstrasse 2–8 <br />D-32760 Detmold (Germany) <br />phone + 49-5231- 953-00 <br />fax + 49-5231- 953-108 <br />email export@schomburg.de <br />www.schomburg.com</p> <p>Technical Data Sheet</p> <p>AG70 </p> <p>Art.-No. 2 05731</p> <p>Primer for ESCOSIL silicone</p> <p>Substrate preparation: <br />The bonding surface must be clean, dry and free from <br />release agents. Remove old adhesive and adhesion <br />inhibiting substances. The joint edges must be clean and <br />free from dust. Clean by brushing out and vacuuming as <br />necessary.</p> <p>• One component <br />• Based on silicone resin <br />• System component of ESCOSIL-2000, <br />ESCOSIL-2000-UW, ESCOSIL-2000-ST <br />Areas of application: <br />To improve the bond of the system-based silicone sealants <br />to metals such as stainless steel, aluminium, copper, <br />galvanized steel, chromium, brass and to certain plastics <br />such as acrylic and PVC. Also to improve the bond of <br />ESCOSIL-2000-ST to natural stone especially when <br />installing in wet duty environments. Where substrates are <br />not named, carry out suitability tests before use.</p> <p>Product application: <br />Apply AG70 thinly and evenly with a clean lint free cloth <br />or paper towel. Do not use a brush. Avoid excess as <br />there is a risk of film formation. When using with natural <br />stone apply carefully to the joints or joint edges and do <br />not spatter. Risk of spotting / staining. Keep to a drying <br />or airing time of min. 15 minutes and max 3 hours (avoid <br />dust accumulation).</p> <p>Technical Data: <br />Density/specific gravity: approx. 0.76 g/cm3 <br />Colour: <br />colourless / lightly yellow <br />Solvent: <br />aliphatic hydrocarbons <br />Drying time *): <br />min. 15-20 mins / max. 3 hrs <br />Ignition temperature: <br />> +420° C <br />Flash point: <br />+9° C <br />Consumption: <br />approx. 80 g/m2 <br />Storage: 12 months when stored in the <br />original unopened packaging. <br />Use opened packaging <br />promptly. <br />Packaging: <br />250 ml</p> <p>Advice: <br />Protect areas not being treated with AG70 from its <br />effects. <br />Please observe a valid EU Safety Data Sheet. <br />GISCODE: S6</p> <p>* Values relate to +23 °C and 50% relative humidity</p> <p>The rights of the buyer with regard to the quality of our materials are based on our terms and conditions of sale and delivery. Our technical advice team will be happy to advise you in the case <br />of requirements that exceed the scope of the application described here. In order to be binding, a legally binding written confirmation is required. The product description does not release the <br />user from a duty of care. Lay a test area in the event of uncertainty. This version becomes invalid in the event of a new version being issued. <br />1/1</p> <p>WKD/CoS/TM</p> <p>29/18</p>
