Technical data sheet AQUAFIN®-CJ6 Thermoplastic swellable waterstop tape for waterproofing of construction joints
Material number
Length
Width, article
Material thickness
Contents
Packaging
Colour
207222001
40 m
20 mm
approx. 5 mm
200 m
Roll
Red
207222002
Product features Extremely dimensionally stable, even at high temperatures tested to 4 bar water pressure watertight concrete sealing system in accordance with BBA
Advantages Simple application Rapid and powerful swelling Self-injecting effect through penetration into cracks and cavities Suitable for fresh water and salt water
Fields of application / waterproofing For internal waterproofing of construction joints in concrete structures
Technical Data Material properties Product components Base material Sealing against pressing water until (in accordance with BBA) Swelling start at water loading Swelling pressure Rate of swelling, 2 hrs. (demin. water) Rate of swelling, 24 hrs. (demin. water) Rate of swelling, 8 days (demin. water) Classification of the reaction to fire in accordance with DIN EN 13501-1
Roll goods TPE 4 bar after approx. 2 hours approx. 1.06 N/mm² approx. 50 % approx. 460 % ≥ 700 % E
Application Application temperature
from 0 °C to 50 °C
SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com 1/3
30/01/2025
Technical data sheet AQUAFIN®-CJ6 Processing equipment Aids/tools Cartridge gun Nail gun
Preparing the substrate Requirement for substrate 1. 2. 3. 4.
Dry Even Clean Free of adhesion inhibiting substances
Preparing the surface 1. The substrate may be matt damp. 2. Water puddling is not permissible.
Application Application 1. A concrete covering of > 8 cm should be carried out to the water-conducting side. 2. Glue AQUAFIN®-CJ6 with mounting adhesive for swellable waterstops. The concreting process can take place no sooner than 8 hours after adhesion. 3. Alternatively, AQUAFIN®-CJ6 can also be fastened with steel nails (min. 5 nails/m). When doing so, it must be ensured that it is pressed onto the substrate over the entire area. 4. Avoid looping and cavities. 5. Swelling tape connections can be applied with an overlap of at least 5 cm or butt-jointed. 6. Butt-jointed swelling tape connections must be secured with a separate swelling tape with an overlap of at least 3 cm.
Storage conditions Storage Cool, dry, protected from sunlight. Min. 24 months in the original canister.
Notes The swellable waterstop must be subjected to a visual check before concreting. Heavily pre-swollen joint sealing tapes are unsuitable and must be removed. A concrete covering of min. 8 cm must be complied with. Swellable waterstops must be protected against floating and slipping in all areas.
Relevant regulations The recognised standards of construction engineering, the relevant guidelines and current regulations must be observed. Observe applicable safety data sheet!
SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com 2/3
Technical data sheet AQUAFIN®-CJ6 Explanations Conformity / Declaration / Verification
The rights of the buyer with regard to the quality of our materials are based on our terms and conditions of sale and delivery. Our technical advice team will be happy to advise you in the case of requirements that exceed the scope of the application described here. In order to be binding, a legally binding written confirmation is required. The product description does not release the user from a duty of care. Lay a test area in the event of uncertainty. This version becomes invalid in the event of a new version being issued.
SCHOMBURG GmbH & Co. KG · Aquafinstr. 2–8 · D-32760 Detmold (Germany) · Tel. +49-5231-953-00 · Fax +49-5231- 953-333 · schomburg.com 3/3