SDS_ASODUR-EV200 (A-Komp.)_-_206436_(22)EN.pdf
10 Pages
287 KB
Download
<h1>SDS_ASODUR-EV200 (A-Komp.)_-_206436_(22)EN.pdf</h1> <p>60.0.21</p> <p>Page 1/10</p> <p>Safety data sheet <br />according to UK REACH <br />Printing date 14.01.2025</p> <p>Version number 22 (replaces version 21)</p> <p>Revision: 14.01.2025</p> <p>SECTION 1: Identification of the substance/mixture and of the company/undertaking <br />· 1.1 Product identifier <br />· Trade name: ASODUR-EV200 (A-Komp.) <br />· UFI: 8FQE-XK2D-800S-TVGJ <br />· 1.2 Relevant identified uses of the substance or mixture and uses advised against <br />No further relevant information available. <br />· Application of the substance / the mixture Bonded Epoxy resin bottom casting mortar <br />· 1.3 Details of the supplier of the safety data sheet <br />· Manufacturer/Supplier: <br />SCHOMBURG GmbH & Co. KG <br />Aquafinstr. 2-8 <br />D-32760 Detmold <br />Detmold, Germany <br />---------------------------------------------Tel: ++49 (0)5231/953-00 <br />Fax: ++49 (0)5231/953-123 <br />Internet: www.schomburg.de <br />· Informing department: <br />Department: Environment and Safety <br />************************************ <br />If you have any questions about the Environment and Safety Department, please contact our <br />department. <br />e-mail: SDB@schomburg.de <br />· 1.4 Emergency telephone number: <br />Poison centre Berlin (24 hours) <br />German & English <br />Tel: ++49 (0)30/30686700 <br />SECTION 2: Hazards identification <br />· 2.1 Classification of the substance or mixture <br />· Classification according to Regulation (EC) No 1272/2008 <br />GHS09 environment <br />Aquatic Chronic 2 H411 Toxic to aquatic life with long lasting effects. <br />GHS07 <br />Skin Irrit. 2 <br />Eye Irrit. 2 <br />Skin Sens. 1</p> <p>H315 Causes skin irritation. <br />H319 Causes serious eye irritation. <br />H317 May cause an allergic skin reaction.</p> <p>· 2.2 Label elements <br />· Labelling according to Regulation (EC) No 1272/2008 <br />The product is classified and labelled according to the GB CLP regulation. <br />· Hazard pictograms GHS07, GHS09 <br />· Signal word Warning <br />(Contd. on page 2) <br />GB</p> <p>60.0.21</p> <p>Page 2/10</p> <p>Safety data sheet <br />according to UK REACH <br />Printing date 14.01.2025</p> <p>Version number 22 (replaces version 21)</p> <p>Revision: 14.01.2025</p> <p>Trade name: ASODUR-EV200 (A-Komp.) <br />(Contd. of page 1)</p> <p>· Hazard-determining components of labelling: <br />2,2'-[(1-methylethylidene)bis(4,1-phenyleneoxymethylene)]bisoxirane <br />Reaction products of hexane-1,6-diol with 2-(chloromethyl)oxirane (1:2) <br />Bisphenol F epoxy resin <br />benzyl alcohol <br />· Hazard statements <br />H315 Causes skin irritation. <br />H319 Causes serious eye irritation. <br />H317 May cause an allergic skin reaction. <br />H411 Toxic to aquatic life with long lasting effects. <br />· Precautionary statements <br />P261 <br />Avoid breathing dust/fume/gas/mist/vapours/spray. <br />P273 <br />Avoid release to the environment. <br />P280 <br />Wear protective gloves / eye protection / face protection. <br />P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact <br />lenses, if present and easy to do. Continue rinsing. <br />P333+P313 <br />If skin irritation or rash occurs: Get medical advice/attention. <br />P501 <br />Dispose of contents/container in accordance with local/regional/national/ <br />international regulations. <br />· 2.3 Other hazards <br />· Results of PBT and vPvB assessment <br />· PBT: Not applicable. <br />· vPvB: Not applicable. <br />SECTION 3: Composition/information on ingredients <br />· 3.2 Mixtures <br />· Description: <br />Solvent- free preparation based on Bisphenol-A-Epichlorhydrin resin molecular weight 700. <br />· Dangerous components: <br />CAS: 1675-54-3 <br />2,2'-[(1-methylethylidene)bis(4,1-phenyleneoxymethylene)] <br />50-100% <br />EINECS: 216-823-5 <br />bisoxirane <br />Index number: 603-073-00-2 <br />Aquatic Chronic 2, H411; <br />Skin Irrit. 2, H315; Eye Irrit. 2, <br />H319; Skin Sens. 1, H317 <br />Specific concentration limits: Skin Irrit. 2; H315: C ≥ 5 % <br />Eye Irrit. 2; H319: C ≥ 5 % <br />CAS: 933999-84-9 <br />EC number: 618-939-5</p> <p>Reaction products of hexane-1,6-diol with 2-(chloromethyl) <br />oxirane (1:2) <br />Skin Irrit. 2, H315; Eye Irrit. 2, H319; Skin Sens. 1, H317; <br />Aquatic Chronic 3, H412</p> <p>10-25%</p> <p>CAS: 9003-36-5 <br />NLP: 500-006-8</p> <p>Bisphenol F epoxy resin <br />Aquatic Chronic 2, H411; <br />1, H317</p> <p>2.5-10% <br />Skin Irrit. 2, H315; Skin Sens.</p> <p>CAS: 100-51-6 <br />benzyl alcohol <br />EINECS: 202-859-9 <br />Acute Tox. 4, H302; Acute Tox. 4, H332; Eye Irrit. 2, <br />Index number: 603-057-00-5 H319; Skin Sens. 1B, H317 <br />ATE: LD50 oral: 1,200 mg/kg <br />· Additional information <br />Contains epoxide-compounds. Note the index of the manufacturer. <br />For the wording of the listed hazard phrases refer to section 16.</p> <p>2.5-10%</p> <p>GB</p> <p>(Contd. on page 3)</p> <p>60.0.21</p> <p>Page 3/10</p> <p>Safety data sheet <br />according to UK REACH <br />Printing date 14.01.2025</p> <p>Version number 22 (replaces version 21)</p> <p>Revision: 14.01.2025</p> <p>Trade name: ASODUR-EV200 (A-Komp.) <br />(Contd. of page 2)</p> <p>SECTION 4: First aid measures <br />· 4.1 Description of first aid measures <br />· General information <br />Personal protection for the First Aider. <br />Symptoms of poisoning may even occur after several hours; therefore medical observation for at <br />least 48 hours after the accident. <br />Personal protection for the First Aider. <br />It is possible to choke in case of vomiting in unconsciousness. <br />Bring unconscious persons into a stable position on side. <br />Keep the respiratory tract free (remove dentures and vomiting). <br />Check the pulse. In case of heart failure you have to make a cardiac massage. In case of stoppage <br />of breathing: artificial respiration. <br />Take up a doctor immediately! <br />· After inhalation <br />Supply fresh air or oxygen; call for doctor. <br />In case of unconsciousness bring patient into stable side position for transport. <br />Supply fresh air and call for doctor for safety reasons. <br />· After skin contact <br />Don't use solvents to clean the skin. <br />Instantly wash with water and soap and rinse thoroughly. <br />Instantly rinse with water. <br />Change immediately contaminated clothes. <br />· After eye contact <br />Rinse opened eye for several minutes under running water. If symptoms persist, consult doctor. <br />· After swallowing <br />Drink copious amounts of water and provide fresh air. Instantly call for doctor. <br />Do not induce vomiting; instantly call for medical help. <br />Show the packaging or the label to the doctor. <br />· 4.2 Most important symptoms and effects, both acute and delayed <br />No further relevant information available. <br />· 4.3 Indication of any immediate medical attention and special treatment needed <br />No further relevant information available. <br />SECTION 5: Firefighting measures <br />· 5.1 Extinguishing media <br />· Suitable extinguishing agents <br />CO2, extinguishing powder or water jet. Fight larger fires with water jet. <br />· 5.2 Special hazards arising from the substance or mixture <br />Formation of poisonous gases during heating or in fires. <br />· 5.3 Advice for firefighters <br />· Protective equipment: Wear self-contained breathing apparatus. <br />· Additional information <br />Dispose of fire debris and contaminated fire fighting water in accordance with official regulations. <br />Follow the emergency-plan. <br />Burst- and explosion-danger by increasing pressure. <br />In case of fire chill the container with water spray. <br />SECTION 6: Accidental release measures <br />· 6.1 Personal precautions, protective equipment and emergency procedures <br />Ensure adequate ventilation <br />Avoid eye- and skin contact. <br />Do not breath in vapour. <br />Keep away from ignition sources <br />Bring persons out of danger. <br />(Contd. on page 4) <br />GB</p> <p>60.0.21</p> <p>Page 4/10</p> <p>Safety data sheet <br />according to UK REACH <br />Printing date 14.01.2025</p> <p>Version number 22 (replaces version 21)</p> <p>Revision: 14.01.2025</p> <p>Trade name: ASODUR-EV200 (A-Komp.) <br />(Contd. of page 3)</p> <p>Wear protective equipment. Keep unprotected persons away. <br />· 6.2 Environmental precautions: <br />Do not allow product to reach sewage system or water bodies. <br />Inform respective authorities in case product reaches water or sewage system. <br />· 6.3 Methods and material for containment and cleaning up: <br />Absorb with liquid-binding, inflammable material (sand, diatomite, acid binders, universal binder). <br />Ensure adequate ventilation. <br />· 6.4 Reference to other sections <br />See Section 7 for information on safe handling <br />See Section 8 for information on personal protection equipment. <br />See Section 13 for information on disposal. <br />SECTION 7: Handling and storage <br />· 7.1 Precautions for safe handling <br />Keep containers tightly sealed. <br />Work with fresh air supply (open windows and doors). <br />Keep away from heat and direct sunlight. <br />Avoid splashes. Do not spray on hot surfaces. <br />Ensure good ventilation/extraction at the workplace. <br />Prevent formation of aerosols. <br />Keep out of the reach of children <br />· Information about protection against explosions and fires: <br />Keep ignition sources away - Do not smoke. <br />· 7.2 Conditions for safe storage, including any incompatibilities <br />· Storage <br />· Requirements to be met by storerooms and containers: Do not leave open containers. <br />· Information about storage in one common storage facility: <br />Please follow the rules of the VCI-Storage-Concept for chemicals. <br />· Further information about storage conditions: <br />Protect from frost. <br />Keep container tightly sealed. <br />· 7.3 Specific end use(s) No further relevant information available. <br />*</p> <p>SECTION 8: Exposure controls/personal protection <br />· 8.1 Control parameters <br />· Components with critical values that require monitoring at the workplace: <br />The product does not contain any relevant quantities of materials with critical values that have to be <br />monitored at the workplace. <br />· Additional information: The lists that were valid during the compilation were used as basis. <br />· 8.2 Exposure controls <br />· Appropriate engineering controls <br />It must be possible to wash the skin in the working area. <br />Eye-wash bottle must be available. <br />· Individual protection measures, such as personal protective equipment <br />· General protective and hygienic measures <br />Clean skin only with cleaning agent especially for epoxy resin. <br />Don't use solvent for skin cleaning! <br />Clean clothes which are contaminate with epoxi resin before unsing again. <br />Wash hands during breaks and at the end of the work. <br />The usual precautionary measures should be adhered to in handling the chemicals. <br />Keep away from foodstuffs, beverages and food. <br />Instantly remove any soiled and impregnated garments. <br />Avoid contact with the eyes and skin. <br />Do not eat, drink or smoke while working. <br />Use skin protection cream for preventive skin protection. <br />(Contd. on page 5) <br />GB</p> <p>60.0.21</p> <p>Page 5/10</p> <p>Safety data sheet <br />according to UK REACH <br />Printing date 14.01.2025</p> <p>Version number 22 (replaces version 21)</p> <p>Revision: 14.01.2025</p> <p>Trade name: ASODUR-EV200 (A-Komp.) <br />(Contd. of page 4)</p> <p>Be sure to clean skin thoroughly after work and before breaks. <br />· Breathing equipment: <br />In case of brief exposure or low pollution use breathing filter apparatus. In case of intensive or longer <br />exposure use breathing apparatus that is independent of circulating air. <br />Gas filter A (brown) in unclear conditions or in confined, unventilated spaces. Wear combination <br />filter A2-P2 (brown/white) when spraying. <br />· Hand protection <br />Hand Protection: Nitril-rubber-latex-gloves. <br />In case of wearing synthetic protective gloves use cotton-gloves as underwear. <br />The glove material has to be impermeable and resistant to the product/ the substance/ the <br />preparation. <br />Selection of the glove material on consideration of the penetration times, rates of diffusion and the <br />degradation <br />· Material of gloves <br />The selection of the suitable gloves does not only depend on the material, but also on further marks <br />of quality and varies from manufacturer to manufacturer. As the product is a preparation of several <br />substances, the resistance of the glove material can not be calculated in advance and has therefore <br />to be checked prior to the application. <br />· Penetration time of glove material <br />The exact break trough time has to be found out by the manufacturer of the protective gloves and <br />has to be observed. <br />· Not suitable are gloves made of the following materials: <br />Leather gloves <br />Strong gloves <br />· Eye/face protection <br />Tightly sealed safety glasses. <br />Suitable safety goggles in accordance with DIN EN 166. <br />· Body protection: <br />Protective work clothing. <br />Contaminated protection clothes must be cleaned carefully before reuse. <br />SECTION 9: Physical and chemical properties <br />· 9.1 Information on basic physical and chemical properties <br />· General Information <br />· Physical state <br />Liquid <br />· Colour: <br />Colourless <br />· Smell: <br />Weak, characteristic <br />· Odour threshold: <br />Not determined. <br />· Melting point/freezing point: <br />Not determined <br />· Boiling point or initial boiling point and <br />boiling range <br />Not determined <br />· Flammability <br />Not applicable. <br />· Lower and upper explosion limit <br />· Lower: <br />Not determined. <br />· Upper: <br />Not determined. <br />· Flash point: <br />Not applicable <br />· Decomposition temperature: <br />Not determined. <br />· pH <br />Mixture is non-soluble (in water). <br />· Viscosity: <br />· Kinematic viscosity <br />Not determined. <br />· dynamic: <br />Not determined. <br />· Solubility <br />· Water: <br />Not miscible or difficult to mix <br />· Partition coefficient n-octanol/water (log <br />value) <br />Not determined. <br />· Steam pressure: <br />Not determined. <br />(Contd. on page 6) <br />GB</p> <p>60.0.21</p> <p>Page 6/10</p> <p>Safety data sheet <br />according to UK REACH <br />Printing date 14.01.2025</p> <p>Version number 22 (replaces version 21)</p> <p>Revision: 14.01.2025</p> <p>Trade name: ASODUR-EV200 (A-Komp.) <br />(Contd. of page 5)</p> <p>· Density and/or relative density <br />· Density at 20 °C <br />· Relative density <br />· Vapour density</p> <p>1.14 g/cm³ <br />Not determined. <br />Not determined.</p> <p>· 9.2 Other information <br />· Appearance: <br />· Form: <br />Liquid <br />· Important information on protection of health <br />and environment, and on safety. <br />· Self-inflammability: <br />Product is not selfigniting. <br />· Explosive properties: <br />Product is not explosive. <br />· Solvent separation test <br />· Organic solvents: <br />≥0.3-<0.4 % <br />· Solids content: <br />0.0 % <br />· Change in condition <br />· Evaporation rate <br />Not determined. <br />· Information with regard to physical hazard <br />classes <br />· Explosives <br />· Flammable gases <br />· Aerosols <br />· Oxidising gases <br />· Gases under pressure <br />· Flammable liquids <br />· Flammable solids <br />· Self-reactive substances and mixtures <br />· Pyrophoric liquids <br />· Pyrophoric solids <br />· Self-heating substances and mixtures <br />· Substances and mixtures, which emit <br />flammable gases in contact with water <br />· Oxidising liquids <br />· Oxidising solids <br />· Organic peroxides <br />· Corrosive to metals <br />· Desensitised explosives</p> <p>Void <br />Void <br />Void <br />Void <br />Void <br />Void <br />Void <br />Void <br />Void <br />Void <br />Void <br />Void <br />Void <br />Void <br />Void <br />Void <br />Void</p> <p>SECTION 10: Stability and reactivity <br />· 10.1 Reactivity No further relevant information available. <br />· 10.2 Chemical stability <br />· Thermal decomposition / conditions to be avoided: <br />No decomposition if used according to specifications. <br />· 10.3 Possibility of hazardous reactions Reacts violently with oxidizing agents <br />· 10.4 Conditions to avoid No further relevant information available. <br />· 10.5 Incompatible materials: Can react with acid and oxidizing agents. <br />· 10.6 Hazardous decomposition products: <br />În case of heating dangerous decomposition products can be arise. <br />SECTION 11: Toxicological information <br />· 11.1 Information on hazard classes as defined in Regulation (EC) No 1272/2008 <br />· Acute toxicity Based on available data, the classification criteria are not met. <br />(Contd. on page 7) <br />GB</p> <p>60.0.21</p> <p>Page 7/10</p> <p>Safety data sheet <br />according to UK REACH <br />Printing date 14.01.2025</p> <p>Version number 22 (replaces version 21)</p> <p>Revision: 14.01.2025</p> <p>Trade name: ASODUR-EV200 (A-Komp.) <br />(Contd. of page 6)</p> <p>· LD/LC50 values that are relevant for classification: <br />1675-54-3 2,2'-[(1-methylethylidene)bis(4,1-phenyleneoxymethylene)]bisoxirane <br />Oral <br />LD50 >15,000 mg/kg (rats) <br />Dermal LD50 23,000 mg/kg (Kan) <br />933999-84-9 Reaction products of hexane-1,6-diol with 2-(chloromethyl)oxirane (1:2) <br />Oral <br />LD50 2,190 mg/kg (rats) <br />Dermal LD50 >2,000 mg/kg (rabbit) <br />9003-36-5 Bisphenol F epoxy resin <br />Oral <br />LD50 >5,000 mg/kg (rats) <br />Dermal LD50 >2,000 mg/kg (rats) <br />100-51-6 benzyl alcohol <br />Oral <br />LD50 1,200 mg/kg (ATE) <br />1,040 mg/kg (mouse) <br />1,620 mg/kg (rats) <br />Dermal LD50 >2,000 mg/kg (rabbit) <br />Inhalative LC50 4.178 mg/l (rats) (OECD 403) <br />· Primary irritant effect: <br />· Skin corrosion/irritation <br />The product has an irritate-effect. <br />Causes skin irritation. <br />· Serious eye damage/irritation Causes serious eye irritation. <br />· Respiratory or skin sensitisation May cause an allergic skin reaction. <br />· 11.2 Information on other hazards <br />· Endocrine disrupting properties <br />None of the ingredients is listed. <br />SECTION 12: Ecological information <br />· 12.1 Toxicity <br />· Aquatic toxicity: <br />1675-54-3 2,2'-[(1-methylethylidene)bis(4,1-phenyleneoxymethylene)]bisoxirane <br />LC50/96h <br />2 mg/l (for) <br />EC50 (48h) (static) <br />1.8 mg/l (Daphnia magna) <br />ERC50 (static) <br />11 mg/l /72h (Scenedesmus capricornutum) <br />IC50 <br />>42.6 mg/l /18h (bacterial toxicity) <br />933999-84-9 Reaction products of hexane-1,6-diol with 2-(chloromethyl)oxirane (1:2) <br />LC50/96h <br />30 mg/l (Leuciscus idus) <br />EC50 (48h) <br />47 mg/l (Daphnia magna) <br />23.1 mg/l (algae toxicity) <br />9003-36-5 Bisphenol F epoxy resin <br />LC50/96h <br />2.54 mg/l (fish toxicity) <br />EC50 (48h) <br />2.55 mg/l (Daphnia magna) <br />EC/LC50 (72h) <br />1.8 mg/l (algae toxicity) <br />100-51-6 benzyl alcohol <br />EC 50 <br />390 mg/kg /(24h) (Pseudomas putida) <br />LC50/96h <br />460 mg/l (Pimephales promelas) (EPA OPP 72-1) <br />645 mg/l (orfe) <br />(Contd. on page 8) <br />GB</p> <p>60.0.21</p> <p>Page 8/10</p> <p>Safety data sheet <br />according to UK REACH <br />Printing date 14.01.2025</p> <p>Version number 22 (replaces version 21)</p> <p>Revision: 14.01.2025</p> <p>Trade name: ASODUR-EV200 (A-Komp.) <br />(Contd. of page 7)</p> <p>EC10 <br />>658 mg/l /16h (Pseudomas putida) (DIN 38412) <br />EC50 (48h) <br />230 mg/l (Daphnia magna) (OECD 202) <br />EC/LC50 (72h) (static) 770 mg/l (Pseudokirchneriella subcapitata) (OECD 201) <br />NOEC <br />51 mg/l /21d (Daphnia magna) (OECD 211) <br />310 mg/l (Pseudokirchneriella subcapitata) (OECD 201) <br />· 12.2 Persistence and degradability No further relevant information available. <br />· 12.3 Bioaccumulative potential No further relevant information available. <br />· 12.4 Mobility in soil No further relevant information available. <br />· 12.5 Results of PBT and vPvB assessment <br />· PBT: Not applicable. <br />· vPvB: Not applicable. <br />· 12.6 Endocrine disrupting properties <br />The product does not contain substances with endocrine disrupting properties. <br />· 12.7 Other adverse effects <br />· Remark: Harmful to fish <br />· Additional ecological information: <br />· General notes: <br />Water hazard class 2 (Self-assessment): hazardous for water. <br />Do not allow product to reach ground water, water bodies or sewage system. <br />Danger to drinking water if even small quantities leak into soil. <br />Harmful to aquatic organisms <br />SECTION 13: Disposal considerations <br />· 13.1 Waste treatment methods <br />· Recommendation <br />Must not be disposed of together with household garbage. Do not allow product to reach sewage <br />system. <br />· Uncleaned packagings: <br />· Recommendation: <br />Empty Containers with solid product rests can be supplied for recycling. <br />Empty Containers including fluid product rests are hazardous waste. <br />SECTION 14: Transport information <br />· 14.1 UN number or ID number <br />· ADR, IMDG, IATA <br />· 14.2 UN proper shipping name <br />· ADR</p> <p>· IMDG</p> <p>· IATA</p> <p>UN3082 <br />3082 ENVIRONMENTALLY HAZARDOUS <br />SUBSTANCE, LIQUID, N.O.S. (bisphenol A(epichlorhydrin); epoxy resin(number average <br />molecular weight<700), Bisphenol F epoxy resin) <br />ENVIRONMENTALLY HAZARDOUS SUBSTANCE, <br />LIQUID, N.O.S. (bisphenol A-(epichlorhydrin); <br />epoxy resin(number average molecular <br />weight<700), Bisphenol F epoxy resin), MARINE <br />POLLUTANT <br />ENVIRONMENTALLY HAZARDOUS SUBSTANCE, <br />LIQUID, N.O.S. (bisphenol A-(epichlorhydrin); <br />epoxy resin(number average molecular <br />weight<700), Bisphenol F epoxy resin) <br />(Contd. on page 9) <br />GB</p> <p>60.0.21</p> <p>Page 9/10</p> <p>Safety data sheet <br />according to UK REACH <br />Printing date 14.01.2025</p> <p>Version number 22 (replaces version 21)</p> <p>Revision: 14.01.2025</p> <p>Trade name: ASODUR-EV200 (A-Komp.) <br />(Contd. of page 8)</p> <p>· 14.3 Transport hazard class(es) <br />· ADR, IMDG, IATA</p> <p>· Class <br />· Label</p> <p>9 Miscellaneous dangerous substances and <br />articles. <br />9</p> <p>· 14.4 Packing group <br />· ADR, IMDG, IATA</p> <p>III</p> <p>· 14.5 Environmental hazards: <br />· Marine pollutant: <br />· Special marking (ADR): <br />· Special marking (IATA): <br />· 14.6 Special precautions for user <br />· Kemler Number: <br />· EMS Number: <br />· Stowage Category</p> <p>Yes <br />Symbol (fish and tree) <br />Symbol (fish and tree) <br />Symbol (fish and tree) <br />Warning: Miscellaneous dangerous substances and <br />articles. <br />90 <br />F-A,S-F <br />A</p> <p>· 14.7 Maritime transport in bulk according to <br />IMO instruments <br />Not applicable. <br />· Transport/Additional information: <br />· ADR <br />· Limited quantities (LQ) <br />· Excepted quantities (EQ) <br />· Transport category <br />· IMDG <br />· Limited quantities (LQ) <br />· Excepted quantities (EQ)</p> <p>· UN "Model Regulation":</p> <p>5L <br />Code: E1 <br />Maximum net quantity per inner packaging: 30 ml <br />Maximum net quantity per outer packaging: 1000 ml <br />3 <br />5L <br />Code: E1 <br />Maximum net quantity per inner packaging: 30 ml <br />Maximum net quantity per outer packaging: 1000 ml <br />UN 3082 ENVIRONMENTALLY HAZARDOUS <br />SUBSTANCE, LIQUID, N.O.S. (BISPHENOL A(EPICHLORHYDRIN); EPOXY RESIN(NUMBER <br />AVERAGE MOLECULAR WEIGHT<700), <br />BISPHENOL F EPOXY RESIN), 9, III</p> <p>SECTION 15: Regulatory information <br />· 15.1 Safety, health and environmental regulations/legislation specific for the substance or <br />mixture <br />· Poisons Act <br />· Regulated explosives precursors <br />None of the ingredients is listed. <br />· Regulated poisons <br />None of the ingredients is listed. <br />(Contd. on page 10) <br />GB</p> <p>60.0.21</p> <p>Page 10/10</p> <p>Safety data sheet <br />according to UK REACH <br />Printing date 14.01.2025</p> <p>Version number 22 (replaces version 21)</p> <p>Revision: 14.01.2025</p> <p>Trade name: ASODUR-EV200 (A-Komp.) <br />(Contd. of page 9)</p> <p>· Reportable explosives precursors <br />None of the ingredients is listed. <br />· Reportable poisons <br />None of the ingredients is listed. <br />· Directive 2012/18/EU <br />· Named dangerous substances - ANNEX I None of the ingredients is listed. <br />· Seveso category E2 Hazardous to the Aquatic Environment <br />· Qualifying quantity (tonnes) for the application of lower-tier requirements 200 t <br />· Qualifying quantity (tonnes) for the application of upper-tier requirements 500 t <br />· National regulations <br />· Technical instructions (air): <br />· Class Share in % <br />· NK <br />0.5 <br />· 15.2 Chemical safety assessment: A Chemical Safety Assessment has not been carried out. <br />SECTION 16: Other information <br />These data are based on our present knowledge. However, they shall not constitute a guarantee for <br />any specific product features and shall not establish a legally valid contractual relationship. <br />· Relevant phrases <br />H302 Harmful if swallowed. <br />H315 Causes skin irritation. <br />H317 May cause an allergic skin reaction. <br />H319 Causes serious eye irritation. <br />H332 Harmful if inhaled. <br />H411 Toxic to aquatic life with long lasting effects. <br />H412 Harmful to aquatic life with long lasting effects. <br />· Department issuing data specification sheet: Environment protection department. <br />· Abbreviations and acronyms: <br />ADR: Accord relatif au transport international des marchandises dangereuses par route (European Agreement Concerning <br />the International Carriage of Dangerous Goods by Road) <br />IMDG: International Maritime Code for Dangerous Goods <br />IATA: International Air Transport Association <br />GHS: Globally Harmonised System of Classification and Labelling of Chemicals <br />EINECS: European Inventory of Existing Commercial Chemical Substances <br />ELINCS: European List of Notified Chemical Substances <br />CAS: Chemical Abstracts Service (division of the American Chemical Society) <br />LC50: Lethal concentration, 50 percent <br />LD50: Lethal dose, 50 percent <br />PBT: Persistent, Bioaccumulative and Toxic <br />vPvB: very Persistent and very Bioaccumulative <br />ATE: Acute toxicity estimate values <br />Acute Tox. 4: Acute toxicity – Category 4 <br />Skin Irrit. 2: Skin corrosion/irritation – Category 2 <br />Eye Irrit. 2: Serious eye damage/eye irritation – Category 2 <br />Skin Sens. 1: Skin sensitisation – Category 1 <br />Skin Sens. 1B: Skin sensitisation – Category 1B <br />Aquatic Chronic 2: Hazardous to the aquatic environment - long-term aquatic hazard – Category 2 <br />Aquatic Chronic 3: Hazardous to the aquatic environment - long-term aquatic hazard – Category 3</p> <p>· * Data compared to the previous version altered. <br />GB</p>
